Qingzhou Xinhang Machinery Equipment Co., Ltd. is mainly engaged in: fiber cutting machine, shredder, double shredder fiber cutting machine is how to operate fiber cutting machine is mainly used to cut fiber products, because fiber products are not high hardness, but the fiber tissue structure is tightly intertwined, large tensile force, shape is not fixed, want to break it, need to use a fiber cutter, then how is the fiber cutter operated?. 1. Before operation, check whether there are foreign objects in the front and back of the machine to avoid accidents; 02. 02. Before starting the machine, check whether the power part is properly connected, before operation, check in detail whether the bolts of each part are fastened, the tension of the chain, belt, power and the cutter are normal, and according to the correct running direction to make the shear motor work normally, and then start the feeding motor. 3. If the material is found to be wound and sheared during operation, do not pull it by hand, cut off the power and stop the machine, and clean it up before continuing production. If abnormal noise or vibration occurs during operation, stop the machine for inspection, continue operation after handling the fault, and clean up other foreign matter on the machine when production is completed, so that the machine can run stably. The above is a related introduction to the operation of fiber cutting machines. I hope you have some understanding. If you have any questions, please call us to inquire, our company will serve you wholeheartedly! Precautions for equipment installation: according to the preset flat and solid ground, select a more spacious installation location, first place the equipment host in a suitable position according to the orientation, flatten the ground plane, so as not to affect the operation due to poor contact between the equipment foot and the ground and affect the operation According to the preset flat and solid ground, select a more spacious installation site, first place the equipment host in a suitable position according to the orientation, flatten the ground foot First, place the equipment host in a suitable position according to the orientation, flatten the ground plane, so as not to cause deflection and affect the operation due to poor contact between the equipment foot and the ground and affect the operation With the development of the modern mechanical processing industry, the requirements for cutting quality and accuracy are constantly improving, and improving Requirements for production efficiency, reduced production costs, and intelligent automatic cutting functions are also increasing. The development of cutting machines must adapt to the requirements of the development of the modern mechanical processing industry. There are many types of cutters, which can be roughly divided into trowel market cutters, rotary twisting knife cutters, gantry cutters, disc cutters, etc. Among them, the rotary torsion cutter has high speed, high cutting accuracy and large cutting thickness. 02 fiber cutting machine, can cut all kinds of garment factory scraps, old yarn, old jeans, old clothes, polyester, chemical fiber, carding machine waste, spinning mill waste and other raw materials. By shredding raw materials into small pieces, using waste cotton recycling machines and recycled cotton machines, almost all textile raw materials can be loosened and recycled, and new fibers can be regenerated. The obtained fibers can be used for spinning, greenhouse bonding, non-woven fabrics, gloves, socks, geotextiles, etc.