15 cm elevator sleeve line 18369415503 provides more choices and convenience for home improvement. Stone plastic elevator door sleeve is a decorative material composed of calcium powder+PVC resin powder. The elevator sleeve made of this material not only has the appearance and texture of marble, but is also more resistant and toughness than traditional materials, and is considered a high elevator kit repair material. The stone plastic elevator door sleeve line includes lines and side panels. In addition to measuring the length and width, the thickness of the side plate also needs to be carefully selected. In the past, 3mm thin plates were used. Currently, 1.5 cm thick plates are used more often. If the stone plastic elevator door sleeve line uses a 3mm sheet, it needs to be primed with a joinery board, and then the thin silicone adhesive is glued to the joinery board, consolidated with foam glue, and then the side card slot of the thin plate is stuck in the line card slot, compacted, and fixed on the base surface of the wall joinery board. The reason for using silicone glue and foaming glue for construction is that silicone glue can no longer solidify within 24 hours, and foam glue needs to be temporarily fixed. Nowadays, the side panel of the stone plastic elevator door sleeve line is more of 1.5 cm thick plate, this kind of thick plate no longer needs to be joinery board, can be directly installed on the wall, and also increases the fire resistance coefficient of the elevator sleeve to a certain extent, can be glued and dry-hung installation method, simple and fast, on the one hand, the stone plastic elevator door sleeve line card slot can better avoid the unaesthetics brought by the joint, on the other hand, can also increase the installation speed. The side panel installation of the stone plastic elevator door sleeve is much simpler than the line. There is no need to cut a 45-degree angle, you can cut directly in parallel to the size. The modern and technological sense of stone plastic elevator door sleeves gives us more choices for every building around us, and also allows us to experience the trend of environmentally friendly building materials and green living. In today's rapid development of the building materials industry, buildings are placing higher and higher demands on stone plastic elevator door sleeves. They need to be safe and fire-proof, healthy and environmentally friendly, natural and beautiful, and even more so to guarantee costs. Stone plastic elevator door sleeve is a high choice in the current market. It has attracted more and more customers to purchase, but as a material, many people don't know the service life of stone plastic elevator door sleeves and. Stone plastic elevator door sleeve is a composite material that mixes auxiliary materials such as stone powder, PVC resin powder, and chemical small materials through high-temperature mixing and extrusion. Therefore, the material has hardness and toughness, which greatly increases the service life. Although it cannot be used for hundreds of years like real stone, the service life of stone plastic elevator door sleeves can reach 30-50 years. It has also fully met the use needs of buildings. Since the service life of the stone plastic elevator door sleeve is higher than that of ordinary stone imitation, there is also a difference. Compared with real stone, the stone plastic elevator door sleeve is less than a quarter of that of marble, and for a material with such high hardness and good toughness, this is already quite low. However, there is no shortage of products on the market that cost only about 100 yuan. In fact, this is not a real stone plastic elevator door sleeve, but a foam material. This material is very fragile, let alone prolong its service life. Today, with the rapid development of the industry, it is impossible to avoid overusing products. It is recommended that you try to go to the stone plastic elevator door sleeve manufacturer to conduct a field survey. Communicate with technical staff. After understanding the product characteristics and installation process, you can save a lot of money during later construction, and with a long-term cooperative manufacturer, it will be more worry-free to undertake the stone plastic elevator door sleeving project in future projects. The development of the building materials industry. 15 cm elevator sleeve