The traditional drying hot air of the plastic heating pellet mixer enters from the lower side of the barrel body. Since the raw material is still, the hot air is more difficult to penetrate, so the phenomenon of lower heat and upper temperature occurs inside the dryer, and sometimes the raw material sintering occurs due to local overheating, causing blockage, making it more difficult for the hot air to enter other areas, so the expected drying effect cannot be achieved. At present, Beiteng's environmental protection design is a two-stage spiral slurry conveying. The first stage feeds the raw materials into the barrel, and the second stage raises the raw materials to the upper part of the barrel body and scatters in an umbrella shape, while the hot air blows out from the center of the lower part of the barrel body to the surroundings, smoothly penetrating upward from the gap of the moving raw material, so that the raw material is fully heated under dynamic conditions. Liaoning plastic granule mixer vertical drying mixer PET sheet mixer This equipment is mainly used in beneficiation, building materials, metallurgy, chemical industry, printing and other departments to dry materials with a certain humidity or particle size. Large-scale energy-saving dryers have strong adaptability to materials, can dry various materials, and the equipment is simple and reliable to operate. Therefore, it is widely used in building materials, metallurgy, chemical industry, cement industry to dry slag limestone, pulverized coal, slag, clay and other materials. The machine is mainly composed of rotary body, lifting plate, transmission device, supporting device and sealing ring. It has the advantages of reasonable structure, excellent manufacturing, high output, low energy consumption, convenient operation, etc. 2. Main structural performance and characteristics of mixer 1. Main structural performance: main frame, mixing barrel, feed inlet, discharge port, motor and stirring screw. The motor directly drives the stirring screw, so that the plastic circulates and flips in the mixing barrel to mix, and the effect is more uniform. 2. Features: easy control, easy maintenance; (vertical design) standing 1-15 tons model for customers to use first: (capacity optional) stainless steel, easy to clean, no rust; (easy to clean) fast mixing speed, can ensure the consistency of each batch of materials; (uniform mixing) has the advantages of small investment, less labor saving, high efficiency; (cost saving) can be customized according to the height requirements of the customer workshop; (Can be made to order) What material can be made according to the customer's own choice; (the material can be stainless steel 201/304)