PE pipe flanging remover, the whole body selected surface plating, all parts (except the blade) are strictly plated, and the edger is more difficult to rust. This flanging remover, the bottom pulley deepens the thread design, supports the center screw of the bottom pulley. Its tapping depth reaches 8mm, which better fixes the pulley. Even if the edger falls directly to the ground or is thrown, the pulley is harder to lose. Once the worker slips during construction, the finger is better protected. This flanging remover has a beveled bevel design, and the bottom bevel of the edger will better protect the PE pipe and the safety of the construction staff's hands. This flanging remover has a bottom pulley design, and 4 pulleys at the bottom of the edger can make construction faster and easier, and also protect the outer wall of the pipe. This flanging remover has a beveled bevel design, and the bottom bevel of the edger will better protect the PE pipe and the safety of the construction staff's hands. If the bottom pulley is lost, the edger can be used normally without damaging the outer wall of the pipe. Once the worker slips during construction, the finger is better protected.