Qingzhou Xinhang Machinery Equipment Co., Ltd. is mainly engaged in: fiber cutter, scraper, double shredder cutter how to accurately position the length of the cutter? 1. Different cutting lengths are configured with different number of tools. The conventional small cutter is equipped with 4 knives, and the regular cutting size is 2cm/5cm/8cm. The switching of the three sizes and lengths can be switched by adjusting the tower wheel connected with the pulley. If you need to cut a smaller size, you can increase it to 6 knives or even 8 knives, and the cutting size zui can be shortened to 3mm2. Adjust the feeding speed of the conveyor belt through the inverter to control the cutting size, the faster the conveyor belt feeding speed, the longer the cutting length, the slower the speed, the shorter the length. 3. In addition to the number of tools and the feeding speed of the conveyor belt, the crushing machine can also add a screen under the moving cutter head, and use the aperture of the screen to control the size of the discharge. Generally speaking, in the case of crushing the same material, the smaller the screen aperture, the smaller the output. The development of cutters has contributed qualitatively to the improvement of cutting technology. First, it solves the safety problem, the input belt inlet is equipped with a safety net, as long as it is safely operated step by step in the use process, the safety problems caused by the cutting machine can almost be avoided, and secondly, it is environmentally friendly. In addition to cutting the materials needed by customers to a fixed size, many factory waste such as chemical fiber, textile waste, waste carton plastic fishing net, etc. can be crushed for deep processing On the basis of recycling waste and saving energy, the environmental crushing cutter can be connected to an external dust collector to control the dust generated by crushed things that are very small and prone to dust, so that it will not harm the operator's respiratory system The fiber cutter fiber crusher produced by our company has stable technology, and a wide range of use, and can be used uninterrupted, and can be used continuously for 24 hours Uninterrupted work.Qingzhou Xinhang Machinery Equipment Co., Ltd. is located in Qingzhou Economic Development Zone, specializing in the research, development, design and production of shearing, crushing, loosening, separating and dispersing equipment for various fiber soft materials. How to operate a fiber cutter A fiber cutter is mainly used to cut fiber products, because the hardness of fiber products is not high, but the fiber structure is tightly intertwined, the tensile force is large, and the shape is not fixed. If you want to break it, you need to use a fiber cutter, so how is a fiber cutter operated? 1. Before operation, check whether there are foreign objects in the front and back of the machine to avoid accidents; 02. 02. Before starting the machine, check whether the power part is properly connected, before operation, check in detail whether the bolts of each part are fastened, the tension of the chain, belt, power and the cutter are normal, and according to the correct running direction to make the shear motor work normally, and then start the feeding motor. 3. If the material is found to be wound and sheared during operation, do not pull it by hand, cut off the power and stop the machine, and clean it up before continuing production. If abnormal noise or vibration occurs during operation, stop the machine for inspection, continue operation after handling the fault, and clean up other foreign matter on the machine when production is completed, so that the machine can run stably. The above is a related introduction to the operation of fiber cutting machines. I hope you have some understanding. If you have any questions, please call us to inquire, our company will serve you wholeheartedly!