GZK300 Automotive Connecting Rod Special Cutting Sawing Machine 020202 This machine is specially customized for cutting automobile engine connecting rods. Fast speed and efficiency, high precision, double table, single sawing 6 pieces, each processing cycle 10 seconds/piece. Equipment technical parameters 1. Sawing capacity: 300x150mm. 2. Main motor power: 3KW, 380V, 50Hz. 3. Band saw blade speed: 2580 m/min variable frequency stepless speed regulation. 4. Working feed mode: servo drive, feed speed 050mm/min, stepless speed regulation. 5. Working clamping method: hydraulic clamping, double worktable, respectively display the pressing pressure of each station. 6. Worktable feed: the maximum feed stroke is 300mm, the feed speed is 160mm/s, using servo control. 7. Blade guide mode: three-guide arm structure, rolling bearing guide, alloy guide block accurate guide. 8. Main transmission mode: worm gear reducer. 9. Saw blade tensioning method: hydraulic automatic tension, display tension pressure. 10. Cooling pump motor power: 0.09KW, 380V, 50Hz. 11. Geometric accuracy of sawing: the offset accuracy of the upper and lower and left and right ends of the cut needs to reach 0.2/100mm.