Kunsheng large sand suction pump_submersible sediment pumping pump-submersible sand discharge pump This product absorbs domestic and foreign technical design and production. The sealing device can effectively balance the indoor and outdoor pressure of the oil, and protect the reliability of the mechanical seal to the limit. The motor adopts various protective measures such as overheating protection, water inlet detection protection, etc., and can operate safely for a long time under harsh working conditions. The front stirring impeller of the water pump can impact the sediment into a high-concentration turbulence, so that the pump can realize high-concentration suction without the need for ancillary devices. It is used for conveying liquid containing abrasive solid particles such as river sand, gravel, cinder, tailings, iron sand, ore, etc. Kunsheng large sand suction pump_submersible sand pumping pump - submersible sand pump model significance: 02100KSQ (R) (X) 100-28-15 (L) 100 - pump outlet nominal diameter (mm) 02KSQ - submersible sediment pump 02100 - rated flow (m3/h) 0228 - rated head (m) 0202 02 0215 - equipped motor rated power (Kw) 02KSQX: stainless steel submersible mud pump 02 02 KSQL: self-cooling submersible mud pump 02KSQR: submersible mud pump 02 KSQRX: stainless steel submersible sediment pump Kunsheng large sand suction pump_submersible sediment pump - submersible sand removal pump conditions of use: 1. 50Hz power supply is 50Hz (60Hz needs to be customized) 230V/380V/415V/440V /660V/1440V three-phase AC power supply, the capacity of the distribution transformer is 2-3 times the rated capacity of the motor. 2. The temperature of the medium shall not exceed 60℃, the temperature of the R type medium shall not exceed 140℃, and does not contain flammable and explosive gases. 3、Weight concentration of solids in the medium: 65%. 4.crew diving depth: not more than 60 meters, small diving depth is subject to submerged motor. 5. the working position of the unit in the medium is vertical, and the upper part is suspended and positioned. Structural characteristics: 1. The whole machine is a dry pump type. The motor adopts an oil chamber sealing method and is equipped with a mechanical seal, which can effectively prevent high-pressure water and impurities from entering the inner cavity of the motor. 2. In addition to the main impeller, there is also a stirring impeller, which can stir the sludge precipitated at the bottom of the water into a turbulent flow and then extract it out. 3. The overflow parts such as impellers and stirring impellers are made of high-chromium cast steel with high hardness, corrosion resistance, strong sand removal ability, and can pass through large solid particles. 4. The motor submerges underwater, is not limited by the suction range, high slag absorption rate, and more dredging. 5. The stirring impeller is in direct contact with the deposition surface, and the concentration is controlled by the depth of submersion. When the specific gravity of the medium is large, the concentration of the medium can be increased by installing an auxiliary device. General application: 1. Conveying tailings, slag, slurry in beneficiation plants. 2. Removal of coal mine cinder, slime and coal slurry. 3. Transportation of fly ash, slime and coal slurry in power plants. 4. Absorb all kinds of emery sand, quartz sand, steel slag solid particles. 5. Beneficiation, gold panning, iron sand pumping. 6. Reclaiming tailings sand from tailings depots for reuse, improving resource utilization, improving operating efficiency and saving operating costs. 7. Clean and transport and discharge ore, tailings, mortar, slag, etc. in tailings dams or mines. 8. Pumping sand in rivers, rivers, lakes, seas and other waters and washing sand in sand fields. 9. Sediment cleaning of rivers, lakes, reservoirs, hydropower stations, ports, etc. 10. Drain sediment, mud, engineering construction drainage, and drainage during pier construction. 11. Municipal pipelines and rainwater pumping stations sediment cleanup 12. Factory sinking sand pools, mine clearing warehouses sediment, dredging rivers, seaside sand mining, cleaning reservoirs sinking sand, scouring wells, etc. 13. Remove steel slag, remove waste slag, remove fly ash from thermal power plants, tailings, coal washing, beneficiation, gold panning, etc. In addition to high sand pumping pump, river sand suction pump, submersible mud pump, excavator dredging pump, hydraulic slurry pump, sewage pump, stainless steel mud pump, etc., our factory can also customize special models according to customer requirements. All the equipment in our factory is one year, shipped in wooden boxes, and most of the equipment is available. Sand pump manufacturer. One year, not satisfied with direct return. New high chromium alloy sand pump model online consultation, we have the strength, only good! Sand pump, ratio one to one, choose one! More than just a choice for you! Each high pump produced ensures that the hacksaw blade does not move, and the pump can operate continuously for 24 hours.