Mining Steel Wire Belt Metal Detector HT/ACRT-18 Shandong Huatang Company Steel Wire Conveyor Metal Detecting Instrument HTACRT-B02 Series High Precision Metal Detector Overview: 02 0202 Suitable for mining, building materials, processing, paper and other industries, using the balance coil principle and phase detection technology, can be used for steel wire belts, high-grade iron ore, metal belt joints and other traditional metals When the detector cannot be used, the detection accuracy is high, and the anti-interference ability is strong. It is suitable for occasions where vibration, temperature and humidity changes and other factors interfere. How it works: The following figure depicts the simplified working principle of a metal detector using a conveyor belt application as an example. Although the form of the metal detector sensor will be different from the figure below, the working principle is the same. The L02 metal detector generates an electromagnetic field. l02 When metal impurities enter the electromagnetic field, the measurement signal will be deflected in one direction. l02 When metal impurities leave the electromagnetic field, the measurement signal will be deflected in the other direction. l02 When both trigger limits of the measurement signal exceed the set value, the controller will generate an alarm signal. The metal detector will output a variety of signals for users to use according to user requirements. Generally, a set of passive normally open and normally closed contacts is provided. The sensor installation opens the upper and lower parts of the sensor, and the bottom of the sensor is installed to the bottom of the belt. After the sensor is firmly fixed, the sensor can be assembled (Figure 4). Open one end of the sensor, pass the C-type sensor through the belt, and fix the other end (Figure 5). (Note: After the bracket of the foldable end of the sensor is folded down, the foldable end must not be subjected to lateral force and downward force to prevent the sensor from deforming, which will affect the detection effect of the detector) Technical parameters Specification Model Headroom Length (LB) Headroom Height (LH) Overall Length (SB) Overall Height (SH) Overall Width (SL) Hole Pitch (BA1) Hole Distance (BA2) HT/ACRT-B- 400680250700270400690210HT/ACRT-B-500840260860280400840210HT/ACRT-B-6509403201020340400940210HT/ACRT-B-800124035012603704001240210HT/ ACRT-B-1000134047014204904001340210HT/ACRT-B-1200154047016204906001540210HT/ACRT-B-1400174047018204906001740210HT/ACRT-B- 1600189047019104906001890210HT/ACRT-B-1800212047021404906002120210HT/ACRT-B-200023404702347023604906002340210 Mining Steel Wire Belt Metal Detection Instrument HT/ACRT-18 Shandong Huatang Company CHUPIN: