02 As an expensive industrial equipment, the reaction tank is the key to mastering the correct operation method and carrying out daily maintenance. Only through correct operation can the use of value be used, and the service life of the reaction tank can be prolonged through maintenance. What do we need to do? The editor lets you learn eight ways to properly operate the reaction tank. 1. Before using the reaction tank, we need to carefully check whether the pipeline and valve meet the feeding conditions. It's a matter of common sense if we don't have the conditions to not meet demand. I hope you don't violate it. 2. The daily inspection work is mainly to check the reducer, stirring motor, mechanical seal, etc., mainly to check whether it can work normally and there are no abnormalities. In addition, it is very important to check whether the oil level of the reducer is appropriate and whether the cooling water supply of the machine is normal. 3. Before inspecting the materials, check for abnormalities, and the quantity should comply with the regulations. All problems should start over. 4. When using the reaction tank, it should be used in strict accordance with the correct operating procedures. Pay close attention to the temperature and pressure in the reaction tank, and it is strictly forbidden to use it over temperature and pressure! 5. When working in the reaction tank, frequent inspection should be carried out to ensure timely treatment of problems. 6. If overheating is found, the correct solution is to cool it down with water until the temperature drops to meet the process requirements. 7. Some reaction tanks will experience overpressure. In case of emergency, open the air release valve immediately to reduce the pressure urgently. 8. Stop cooperating due to an accident, such as a power outage, stop feeding immediately, and then open the exhaust valve to cool the water. Regular parking should be cleaned at the kettle slag, and the bottom valve, inlet valve, inlet valve, sewage valve, etc. should be closed. The above 8 methods are very detailed and teach you how to properly operate the reaction tank. In future production and use, users are advised to strictly implement the rules of use, so that the reaction tank can work for a long time and prolong the service life.