Butyl self-adhesive waterproof tape*leak repair 02*sunscreen 02*waterproof 02*anti-aging 02*high temperature waterproof membrane *waterproof coating*butyl tape*self-adhesive coating*free brick*polypropylene* all kinds of leak repair materials Contact; Manager Wang sales phone number; 13573642481 Welcome to call Butyl waterproof tape is butyl rubber as the main material, with other additives, optional Polymer materials, environmentally friendly solvent-free, non-curing self-adhesive waterproof sealants produced through a special process, have adhesion to the surface of various materials, weather resistance, aging resistance and waterproof properties, and have the effects of sealing, damping and protecting the surface to be adhered. Since it is completely solvent-free, it does not shrink or emit toxic gases; because it does not cure, it follows the thermal expansion and contraction and mechanical deformation of the sticky surface, and is a waterproof material. 021. Product characteristics 1) It can maintain flexibility and adhesion, can withstand a certain degree of displacement, and has good followability in deformation. 2) Waterproof sealing and chemical corrosion resistance, strong ultraviolet (sunshine) resistance; long service life. 3) Easy to use, accurate dosage, reduced waste, and high cost performance. 4) Does not contain any solvents, safe and environmentally friendly. 2. Main uses 1) the mutual connection between the color steel plate and the lighting board of the steel roof, and the connection of the overboard gutter 2) the sealing and waterproof of doors and windows, concrete roofs, ventilation pipes. 3) Installation of PC board and endurance board. 4) Car doors and windows waterproof film paste, seal and shock resistance. 3. Construction method 1) According to the gap of the color steel plate type or joint part, according to the engineering design requirements, select the appropriate waterproof tape; 2) before pasting, the surface of the color steel plate must be completely removed from the water, oil, dirt and other impurities to keep the pasting surface clean; 023) From one end of the color steel plate, open the double-sided tape in a straight line along the seam and stick the tape to the lower plate At the junction, then press the tape lightly to heavy with your hands 4) Tear off the upper isolation paper of the tape, press the upper color plate steel plate of the interface into the joint, and squeeze the joint in order after pressing, so that the joint is firmly bonded and the sealing effect is good. Qianyu Wangpu https://23460.qianyuwang.com/