LOW-E glass, also known as low-radiation coated glass, is a film layer containing pure metal silver on the basis of an offline coating process to reduce the radiation rate of glass and improve the performance of insulating glass. At the same time, the glass has good spectral selectivity, on the basis of a large amount of visible light, it can block a significant part of the infrared from entering the room, not only keep the indoor light bright, but also reduce the indoor heat load to a certain extent. More and more LOW-W glass is becoming a raw material for insulating glass, so film removal is inevitable. Tianbao horizontal glass film remover, offline LOW-E (coated) glass film remover, film remover is a mechanical film removal equipment independently developed and produced by four-way machinery according to the characteristics of LOW-E (coated) glass processing. It is especially suitable for small and medium-sized glass deep processing manufacturers without large LOW-E film removal equipment. E-glass processing companies love it. The glass film remover was created in this context. The glass film remover mainly removes the coating layer around the coated glass to meet the requirements of making insulating glass. It uses adjacent sides to remove the film at the same time, and the production efficiency is high. The film removal width and film removal thickness are adjustable, PLC full control, the glass is recognized by the photoelectric switch after the machine is on the machine, the grinding wheel automatically starts and stops according to the glass size, and the air cushion system and the dust collection system start and stop at the same time with the grinding wheel, so as to achieve the purpose of saving energy and cost. Technical parameters: Input power: 380V50Hz Input power: 3.41Kw Glass thickness: 3-20mm Film removal speed: 20m/min Processing size: 2000 × 1600 mm Dimensions: 2965 × 2310 × 1125 mm Weight (about): 500Kg