The RYF-25 oil-water separator can effectively remove dust, water, and oil mist from compressed air. This series of products has large water and oil removal capacity, and is suitable for a wide range of work. The utility model has the advantages of small exhaust volume, low noise, reasonable cylinder design, small resistance, high gas quality after passing through the oil-water separator, and good effect. ZMJT052RYF-25 oil-water separator is the supporting equipment of air compressor. It integrates cyclone separation and coagulation filtration in the secondary purification filter; it directly intercepts the oil and water in the compressed air. Through cyclone separation, inertial collision, gravity settlement, it can effectively remove most of the specific gravity of oil, water and dust in the compressed air. The working principle of RYF-25 oil-water separator has the centrifuge effect that a large amount of oil and solid impurities compressed air enters the separator and rotates down along the inner wall. The oil and water is sucked out of the airflow and flows down the wall to the bottom of the oil-water separator, and then filtered by the filter element. When the gas passes through the filter element, it is firmly adhered to the fiber due to the blocking of the filter element, inertial collision, and the Van der Waal force, static electricity, and vacuum suction between molecules, and gradually increase into droplets, and drip into the bottom of the separator under the action of gravity. Product features of RYF-25 oil-water separator 1. Reasonable cylinder design makes the gas flow in the cylinder more reasonable and reduces resistance. 2. Increase the filtration accuracy to 0.1μm to make the gas of higher quality and better effect. 3. The filter area of the filter element is increased, the resistance is reduced, and the service life of the filter element is prolonged. 4. The inner and outer layers are treated with plasticization and anti-rust, which has good anti-rust effect and avoids secondary pollution of compressed air. RYF-25 oil-water separator technical parameters model: RYF-25 rated processing air volume (Nm3/min): 27 inlet and outlet diameter DN (mm): 80 high: 1280 cylinder diameter: Φ273 weight (kg): 135