The main body of the TL series steel cable drag chain is composed of chain pin (high quality steel chrome plated) support pin (extruded aluminum alloy) shaft pin (alloy steel) and other components, so that there is no relative movement between the cable or rubber tube and the drag chain, no distortion, no distortion, chain spanner chrome plated appearance effect novel and reasonable structure, dexterity, high strength, good rigidity, no deformation, easy installation, reliable use, easy to disassemble, especially the use of high-strength wear-resistant materials, Alloy copper is the shaft pin, which improves the wear resistance of the product, the bending is more flexible, the resistance is smaller, and the noise is reduced, so that it can be used for a long time without deformation and sagging. 1. The drag chain can adapt to a maximum movement speed of 40 m/min. 2、At the maximum moving speed of the drag chain, the noise sound pressure level is not greater than 68 dB. 3. The safe service life of the drag chain is not less than 10 million times (round trip). The specifications of the steel cable drag chain are 45, 65, 95, 125, 180, 225, 250. The width of the drag chain can be customized according to user requirements, and the bending radius is between 50-800. There are three types of support plates. (1) When the drag chain needs to carry a large pipe or cable load, a high-strength support plate should be used - the whole block type. (2) When the size of the pipe joint of the cable is larger than the inner cavity aperture of the support plate or needs to be disassembled and repaired frequently. Optional support plate - separate type (3) When there are many specifications of the installation cable, a support plate - frame type can be selected. steel cable drag chain