Multifunctional bubble cleaning machine pea cleaning machine bean cleaning air trunk line can be customized, adopts bubble cleaning, effectively separates surface adherents of the object to be cleaned, simulates the basic action of manual cleaning, effectively avoids touching, scratching and other phenomena in manual cleaning, improves work efficiency, and changes human work into mechanized processing. Suitable for all kinds of fresh vegetables, salted vegetables, fungi, seafood. According to the specific gravity of the material to be cleaned, two models are designed: full mesh belt type and half mesh belt type. The half mesh belt type is suitable for materials with a specific gravity less than or equal to water, and the full mesh belt type is suitable for materials with a greater proportion than water or afraid of bumps. Multifunctional bubble cleaning machine pea cleaning machine bean cleaning air trunk can be customized Instructions for use: The cleaning equipment consists of tank body, inner tank, sediment isolation net, lifting device, bubble generator and other main parts. Operation steps: (1) clean the water tank and fill it with water; inject clean water into the main tank to the overflow port where water overflows. (2) Start the conveyor belt motor, so that the mesh belt runs normally and the direction is correct; (3) start the vortex pump, inject the air into the tank water, so that the water in the tank twerks; (4) open the spray pipe valve, so that the water is evenly sprayed on the mesh belt; (5) check the running parts to determine the normal operation can work. (6) Depending on the degree of cleaning of the material, it can be cleaned separately, and then the mesh belt conveyor multi-function bubble cleaning machine pea cleaning machine beans cleaning air trunk can be customized Working principle: the material falls into the water, the water twerking in the tank is used to stir the material for cleaning, the sediment and other heavy dirt on the material falls into the sedimentation area under the filter after separation, the material gradually moves to the conveyor belt under the push of water, Promoted The inner tank is then sprayed and cleaned, and the material is washed twice, and the following process is entered. The rinses that have been cleaned are intercepted by a filter. During the work process, the water inlet pipe and the spray water pipe are always supplied with water, so that the sewage in the water tank is gradually replaced.