Corrugated plate assembled steel silo is referred to as assembly warehouse for short. It is a kind of steel plate silo formed by mechanical roller pressing and punching molded into corrugated plate, and then connecting and assembling high-strength bolts. Most of the corrugated wall panels use a roll-pressing process and are mass-produced by mechanical forming production lines. The performance characteristics of the assembly warehouse are as follows: 1. All steel silos are made of high-quality hot-dip galvanized sheet, all parts are standard components, and the design, production, installation and use of the steel silo strictly abide by the relevant national standards. 2. It has the characteristics of fast installation and small investment. 3. Steel silo height and diameter can be selected in a wide range, the distance between the two warehouses is less than 80cm, small footprint, strong adaptability, the maximum capacity of this kind of warehouse type can reach 10,000 tons/warehouse 4. During normal use, if the temperature of the grain in the warehouse rises to the critical point due to the high water content, the supporting temperature measurement system will timely sound and light alarm to tell you that a part of the grain is in danger, should be ventilated Cool down 5 The steel silo diameter can be arbitrarily selected from 2.7-32m. Prefabricated steel silos are widely used in grain and oil, chemical, brewing, medicine, food, cement, coal and other industries! It is entirely constructed by special equipment to create characteristic steel silos with good function and long life in the process of construction. During the winding process, the outer wall of the bin is made of a spiral convex strip five times the thickness of the material 30mm-40mm wide, which greatly enhances the bearing capacity of the warehouse, and makes the overall strength, invariance and shock resistance of the silo superior to other silos. In addition, materials with particularly strong anti-corrosion properties are selected, which makes it have a longer lifespan than other warehouses. Good airtight function and wide use. Equipment on the roof of the warehouse. The forming and bending line speed of the construction equipment can reach 5m/min, and the silo is constructed on site. There is no need for scaffolding or other auxiliary equipment, so the construction period is extremely short. The warehouse is made of thin steel plates, and the weight is only appropriate for the reinforced concrete silo of the same capacity, which greatly reduces the cost. In addition, because it can use the double-layer bending method to bend and form two unsuitable materials inside and outside the cylinder, it can greatly reduce the engineering cost of storing highly corrosive materials used in chemical and environmental protection operations. Small footprint and easy to score points. Height and diameter can be arbitrarily selected in larger bundles. The minimum interval between the two silos is 500mm, which can fully use the space, and the silo does not fit with other steel silos. Decrease floor area. The warehouse has a high level of activism, and is equipped with equipment such as temperature measurement and material level, so it is very convenient for users to score points. Skillfully, it can cover the quality of any part of the warehouse, and the silo bends and bites because special equipment is used. Therefore, its sealing is particularly good assuming that storing grain satisfies the skill requirements of insecticide and fumigation, and that it arbitrarily selects cylinder materials from a variety of materials according to the material properties and skill requirements for storing solids and liquids. This makes it widely used in industrial fields such as grain and brewing, urban and rural areas, industrial sewage purification fields, and agricultural fields. The construction period is short and the cost is low. Qianyu Wangpu https://29832.qianyuwang.com/